5230 Mining Excavator Spare parts 1912391 HARNESS AS

Product Name: Part NO.1912391 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Get a Quote -

DESCRIPTION

Product Name: Part NO.1912391 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Part NO.1912391 HARNESS AS suitable for 1670929 WIRING GP-SWING FRAME
NPR: Y

SEQPart NO.NameMODEL
13J19073J1907 SEAL TO PLUG ON VALVE ASSEMBLY & PLUGS ON MANIFOLD ASSEMBLY
23K03603K0360 SEAL PILOT MANIFOLD ON
38T42238T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM
48T41338T4133 NUT-ELBOW TO MANIFOLD
58T41218T4121 WASHER-HARD (21.0 MM OD)
68T41368T4136 BOLT-ALTERNATOR STRAP TO FAN DRIVE
77K11817K1181 STRAP USE AS REQUIRED
89G91509G9150 CLIP-TO ENGINE COOLANT SWITCH MOUNTING
98T41798T4179 BOLT (20mm LONG)
108T41378T4137 BOLT (M10 X 1.5 X 20MM)
113S20933S2093 STRAP-CABLE-TO TIE HARNESSES TOGETHER
123E33653E3365 WEDGE-RECEPTACLE LOCK
138T87298T8729 PIN-CONNECTOR
1410288021028802 KIT-RECEPTACLE (2 PIN)
152M97802M9780 SEAL-O-RING 19.18 MM (0.755 IN) DIAMETER
168T41968T4196 BOLT (M10 X 1.50 X 35 MM)
178T41858T4185 BOLT (M10 X 1.50 X 50 MM)
188T41958T4195 BOLT (M10) (30MM LONG)
196V39226V3922 SEAL-O-RING (ID=18.72mm)
205P90855P9085 CLIP (7.94 MM ID)
2103382480338248 CLIP (small)
226D42466D4246 CLIP 19.05 mm(.75 in.) wide
231S09941S0994 CONDUIT CLIP (USE AS REQUIRED)
244B20434B2043 NUT (Part of 9F3099 Switch)
254B48634B4863 WASHER (FOR USE CLAMP)
264D77944D7794 CLIP-- COMPRESSOR CLUTCH WIRE TO COMPRESSOR BODY
279M84069M8406 CLIP-TO 8X7433 HARNESS AS ON FORE-AFT
284P75814P7581 CLIP (FOR USE WITH 7.9MM WIDE TIE WRAP)
299X34019X3401 PIN-CONNECTOR
309X18139X1813 SLEEVE (ORDER BY CM)(USE AS REQUIRED)
314P81344P8134 LADDER GROUP
328M27738M2773 CLIP .69 in. (17.5mm) dia. hose
3313053001305300 CLIP ASSEM.
3410288031028803 RECEPTACLE KIT, 3 PIN
356V18896V1889 CLIP (28.58MM ID)
369G91529G9152 CLIP-SURE SEAL-TO BOSS ON BOTTOM LH OF
377X25437X2543 BOLT (M10X1.5X120MM)
384P74284P7428 LADDER CLIP
393E33713E3371 WEDGE-RECEPTACLE LOCK
404P74294P7429 CLIP (26.5MM ID)
4112329931232993 SWITCH ASSEM. (HYD. OIL LEVEL)BG 245C Asphalt Paver, AP 1050B Asphalt Paver, BG 2455C Asphalt Paver, AP 1055B Asphalt Paver, PM 565 Cold Planer
427D72337D7233 CLIP (LARGE)
439X34959X3495 CLIP AS-TO RADIATOR BYPASS TUBE-FOR
444K88644K8864 CLIP (USE WITH A/C)
456G22636G2263 SPACER
463T18153T1815 ALARM (back-up)PR 1000 Cold Planer, PR 1000C Cold Planer, BG 230 Asphalt Paver, AP 800C Asphalt Paver, RR 250 Road Reclaimer
475P83945P8394 SCREW-MACHINE
488X58048X5804 STRAP AS-GROUND
4910275321027532 SENSOR GP-TEMPERATURE
5011699331169933 SWITCH AS-PRESSURE
5110851121085112 PLATE
5217270741727074 SWITCH AS-PRESSURE
5317270831727083 SWITCH AS-PRESSURE
5419123911912391 HARNESS AS
5511210631121063 HARNESS AS

Suitable for assembly

1670929 WIRING GP-SWING FRAME

Previous:Part NO. 3366361 WIRING GP-CONSOLE for 328D LCR Excavator

Next:Part Number 5I8229 WIRING GP for 320-A N Excavator