Part NO. 1864188 HARNESS AS-ENGINE Fits for 5130B Mining Excavator

Part NO. 1864188 HARNESS AS-ENGINE Fits for 5130B Mining Excavator

Product Name: Part NO.1864188 HARNESS AS-ENGINE
CCR: Y
FILTER: N
MAINT: N
For Model: 3508B Engine Machine, 5130B Mining Excavator

Product Name: Part NO.1864188 HARNESS AS-ENGINE
CCR: Y
FILTER: N
MAINT: N
For Model: 3508B Engine Machine, 5130B Mining Excavator

Part NO.1864188 assembly
  • SEQPart NO.NameQTYNPRMODELModifier
  • 3627K11817K1181 STRAP USE AS REQUIREDY(4.00IN DIA)
  • 5068T87298T8729 PIN-CONNECTORY(16-GA TO 18-GA)
  • 50810288021028802 KIT-RECEPTACLE (2 PIN)Y(2-PIN)
  • 30442L80712L8071 TERMINAL (1/2" SCREW) (USED WITH NO. 10 WIRE)Y(10-GA TO 12-GA, 1/2-IN SCREW)
  • 56592L80792L8079 TERMINAL (3/8" SCREW)(USED WITH NO. 14 WIRE)Y(14-GA TO 16-GA, 3/8-IN SCREW)
  • 57112L80492L8049 TERMINAL-RING 6 GA. (NO. 10 SCREW)Y(6-GA, NO. 10 SCREW)
  • 91592L80572L8057 TERMINAL (used with No. 8 wire)Y(8-GA, NO. 10 SCREW)
  • 147608T87378T8737 PLUG-SEALY(40 PIN CONNECTOR)
  • 1569810288041028804 KIT-RECEPTACLEY(4-PIN)
  • 163339X34019X3401 PIN-CONNECTORY(16-GA TO 18-GA)
  • 1850315522701552270 KIT-CONNECTING PLUGY(2-PIN)
  • 1850415522551552255 KIT-CONNECTING PLUGY(12-PIN)
  • 185068T87308T8730 SOCKET-CONNECTORY(16-GA TO 18-GA)
  • 1850915522601552260 KIT-CONNECTING PLUGY(3-PIN)
  • 1851715522711552271 KIT-CONNECTING PLUGY(4-PIN)
  • 1878710288011028801 KIT-RECEPTACLEY(12-PIN)
  • 196382L80812L8081 TERMINAL (1/2" SCREW) (USED WITH NO. 14 WIRE)Y(14-GA TO 16-GA, 1/2-IN SCREW)
  • 219009W08449W0844 SOCKET-CONNECTIONY(14-GA TO 16-GA)
  • 2196910288031028803 RECEPTACLE KIT, 3 PINY(3-PIN)
  • 234908T88278T8827 TERMINALY(RED)
  • 234925P34545P3454 TERMINAL-CRIMPY(4-GA, 5/16-IN SCREW)
  • 2409711068441106844 SEALY(40 PIN PLUG)
  • 258728N15488N1548 PIN-CONNECTORY(4-GA)
  • 271589X68569X6856 PIN-CONNECTORY(16-GA TO 18-GA)
  • 271629X68579X6857 SOCKET (USE WITH PAYLOAD MONITOR)Y(16-GA TO 18-GA)
  • 3024403751970375197 BOOTY(72MM LG)
  • 335807G79207G7920 PLUG-SEALY(CE 4-6)
  • 335818N15498N1549 SOCKET-CONNECTIONY(4-GA)
  • 363447G79177G7917 PLUG-SEALY(CE 16-18)
  • 363458N15218N1521 ENDBELL AS-CONNECTIONY(HITCH HARNESS/TMSN CONTROL)
  • 363577G79187G7918 PLUG-SEALY(GROMMET)
  • 381423B36383B3638 NIPPLEY(SPARK PLUG)
  • 478837G79197G7919 PLUG-SEALINGY(CE 8-10)
  • 5502811068471106847 PLUG AS-CONNECTORY(40-PIN)
  • 810408N15408N1540 PIN-CONNECTORY(12-GA TO 14-GA)
  • 1952328N15188N1518 PLUG AS-CONNECTORY(25-PIN)
  • 2313989X49989X4998 SOCKETY(14-GA TO 16-GA)
  • 2954523T30443T3044 PLUG AS-CONNECTORY(25-PIN)
  • 38891611235871123587 BOOTY(40-PIN)

Part NO.1864188 HARNESS AS-ENGINE suitable for 1864187 WIRING GP-ENGINE
NPR: Y
  • SEQPart NO.NameMODEL
  • 18L27868L2786 SEAL PLUG ON MANIFOLD ASSEMBLY
  • 26V50486V5048 SEAL--O-RING-TO GOVERNOR DRIVE HOUSING
  • 33K03603K0360 SEAL PILOT MANIFOLD ON
  • 44N38414N3841 GASKET-COOLANT FLOW SWITCH
  • 53E33653E3365 WEDGE-RECEPTACLE LOCK
  • 68T87298T8729 PIN-CONNECTOR
  • 710288021028802 KIT-RECEPTACLE (2 PIN)
  • 82M97802M9780 SEAL-O-RING 19.18 MM (0.755 IN) DIAMETER
  • 96V39226V3922 SEAL-O-RING (ID=18.72mm)
  • 109M19749M1974 WASHER PLATE TO BRACKET ASSEMBLY
  • 112V32162V3216 CLIP (large)
  • 125M28945M2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET)
  • 130S15940S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE
  • 140S05090S0509 BOLT--BETWEEN CASE AND SUPPORT OF LOADER FRAME (L.H. & R.H.)
  • 150S15880S1588 BOLT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS
  • 162H38552H3855 BOLT R.H. FRONT ROPS LEG TO LOADER FRAME
  • 170S16200S1620 BOLT 19 MM (1/2" x 3/4") -TO GRAB IRON
  • 189H82609H8260 BOLT 15.9 cm(6.25 in.) long
  • 191F79581F7958 NUT .5 in.(1.27 cm) diameter
  • 200S16210S1621 BOLT --BRACE TO STARTING ENGINE MOUNTING PAD
  • 215P82455P8245 WASHER-JACKSCREW SUPPORT TO FRONT SUPPORT
  • 221D45971D4597 BOLT 165.10 mm(6.50 in.) long
  • 232B26952B2695 BOLT-- VALVE ASSEMBLY TO L.H. COWL
  • 243H76543H7654 WASHER (3.0MM THK)
  • 252A15312A1531 BOLT 13 mm (1/2 inches) x 127 mm (6 inches)
  • 267E60167E6016 GASKET AS
  • 277J91087J9108 SEAL-TO TRANSMISSION COOLER PORTS
  • 289S87529S8752 NUT 8.33mm(.328 in.)thick
  • 294P75814P7581 CLIP (FOR USE WITH 7.9MM WIDE TIE WRAP)
  • 309X18139X1813 SLEEVE (ORDER BY CM)(USE AS REQUIRED)
  • 3103079460307946 ELBOW-FUEL PRESSURE PICKUP
  • 328T67678T6767 PLUG-PIPE (3/8-18NPTF)
  • 3318637351863735 PIN-CONNECTOR
  • 344P81344P8134 LADDER GROUP
  • 357W64927W6492 PLUG (USE WITHOUT AIR COMPRESSOR)
  • 369X67729X6772 STRAP-CABLE
  • 3719467251946725 PRESSURE SENSOR GROUP385B Excavator, C15 Engine Machine, C 13 Engine Machine, C13 Engine Machine, RM 500 Reclaimer Mixer
  • 386V18896V1889 CLIP (28.58MM ID)
  • 394P74284P7428 LADDER CLIP
  • 4012966281296628 SPEED SENSOR GROUPPM 565 Cold Planer, 3408E Engine Machine, PM 565B Cold Planer, D9R Track Type Tractor, 651E Wheel Tractor
  • 4116199261619926 SENSOR GP-PRESSURE3508B Engine Machine, 3456 Generator Set, 3512C Petroleum Gen Set, PM 565 Cold Planer, 3408E Engine Machine
  • 429X02629X0262 ADAPTER
  • 4314456611445661 SWITCH AS-PRESSURE
  • 443K69053K6905 VALVE (bleeder)
  • 459X02639X0263 ADAPTER
  • 4616378821637882 SENSOR GP-EXHAUST TEMPERATURE3516C Generator Set, 793C Truck, 3516 Engine Machine, 3516B Engine Machine, 3508B Engine Machine
  • 4712402891240289 CLIP
  • 4810222401022240 ELECTRONIC SENSOR GROUP631G Wheel Tractor, 725 Articulated Truck, 3408E Engine Machine, PM 565 Cold Planer, PM 565B Cold Planer
  • 4911700681170068 HOSE AS
  • 5011700691170069 BLOCK-SENSOR MOUNTING
  • 518D90598D9059 BRACKET
  • 5219467241946724 PRESSURE SENSOR GROUPTK1051 Track Feller Buncher, 3406E Engine Machine, 385B Excavator, 797 Truck, PM 565 Cold Planer
  • 5312329931232993 SWITCH ASSEM. (HYD. OIL LEVEL)BG 245C Asphalt Paver, AP 1050B Asphalt Paver, BG 2455C Asphalt Paver, AP 1055B Asphalt Paver, PM 565 Cold Planer
  • 5411700671170067 ELBOW
  • 556K81796K8179 CLIP HARNESS ASSEMBLY
  • 5617286601728660 SWITCH GP-LIQUID LEVEL584HD Forwarder, BG 230 Asphalt Paver, AP 800C Asphalt Paver, BG 245C Asphalt Paver, AP 1050B Asphalt Paver
  • 5716199311619931 SENSOR GP-PRESSUREPM 565B Cold Planer, 3408E Engine Machine, D9R Track Type Tractor, 651E Wheel Tractor, 651E Wheel Scraper
  • 587E53267E5326 COVER
  • 5911530691153069 CLIP AS-CONNECTING
  • 6016199291619929 SENSOR GP-PRESSURE651E Wheel Tractor, 651E Wheel Scraper, 657E Wheel Tractor, 657E Wheel Scraper, 3412E Engine Machine
  • 6112157291215729 ELBOW
  • 6209898520989852 BAR
  • 6315374851537485 WIRE AS-GROUND
  • 6425522822552282 SWITCH AS-PRESSURE
  • 653A36923A3692 CLIP
  • 665V69495V6949 STRIP
  • 6727350412735041 SENSOR GP-SPEEDCD 54B Vibratory Compactor, PM 565 Cold Planer, 3408E Engine Machine, CB 54B Vibratory Compactor, 3516C Locomotive Engine
  • 6826168472616847 ADAPTER
  • 6926168482616848 SENSOR GP-EXHAUST TEMPERATURE3512C Industrial Engine, 3512B Generator Set, 3512C Generator Set, 3512B Industrial Engine, 3516B Industrial Engine
  • 7017187091718709 SWITCH GP-FLOW3508B Engine Machine, 776D Tractor, 777D Truck, 793C Truck, 3516 Engine Machine
  • 7118641881864188 HARNESS AS-ENGINE3508B Engine Machine, 5130B Mining Excavator
Suitable for assembly
  • 1864187 WIRING GP-ENGINE
The names KAWASAKI, BOSCH, REXROTH, NABTESCO, KAYABA, NACHI, EATON, TOSHIBA, CATERPILLAR, Cat, John Deere, KOMATSU,HITACHI,KOBELCO,KATO,SUMITOMO,HYUNDAI,DOOSAN,DAEWOO,SAMSUNG, YANMAR, KUBOTA, JCB, CASE, NEW HOLLAND, ISUZU, MITSUBISHI, HINO, DEUTZ, PERKINS, CUMMINS, ZEXEL, DENSO, DELPHI or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only. Our website is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.
X
Telegram
X
Line
X
Line