Part NO. 1686343 HARNESS AS for 5230 Mining Excavator

Part NO. 1686343 HARNESS AS for 5230 Mining Excavator

Product Name: Part NO.1686343 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Product Name: Part NO.1686343 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Part NO.1686343 HARNESS AS suitable for 1670931 WIRING GP-ENCLOSURE
NPR: Y
  • SEQPart NO.NameMODEL
  • 18T42238T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM
  • 28T41338T4133 NUT-ELBOW TO MANIFOLD
  • 38T41218T4121 WASHER-HARD (21.0 MM OD)
  • 48T41368T4136 BOLT-ALTERNATOR STRAP TO FAN DRIVE
  • 58P85408P8540 GROMMET 27 mm(1.06 in.) Wide
  • 67K11817K1181 STRAP USE AS REQUIRED
  • 79G91509G9150 CLIP-TO ENGINE COOLANT SWITCH MOUNTING
  • 88T41798T4179 BOLT (20mm LONG)
  • 99X82569X8256 WASHER (2.0MM THK)
  • 108T41378T4137 BOLT (M10 X 1.5 X 20MM)
  • 113S20933S2093 STRAP-CABLE-TO TIE HARNESSES TOGETHER
  • 128T64668T6466 BOLT (M10X1.50X60MM)
  • 138T42248T4224 WASHER-TO ASSEMBLE VALVE AS AND PLATES
  • 148T41958T4195 BOLT (M10) (30MM LONG)
  • 157J02047J0204 SEAL-O-RING (ID=7.65mm)
  • 165P90855P9085 CLIP (7.94 MM ID)
  • 1703382480338248 CLIP (small)
  • 185C28905C2890 NUT (M6X1.00 THD)
  • 196D42466D4246 CLIP 19.05 mm(.75 in.) wide
  • 201S09941S0994 CONDUIT CLIP (USE AS REQUIRED)
  • 214B20434B2043 NUT (Part of 9F3099 Switch)
  • 224B48634B4863 WASHER (FOR USE CLAMP)
  • 234D77944D7794 CLIP-- COMPRESSOR CLUTCH WIRE TO COMPRESSOR BODY
  • 248M27708M2770 CLIP .5 in. (1.27 cm) I.D. hole
  • 254H25584H2558 GROMMET BRACKET ASSEMBLY TO DASH
  • 268T34908T3490 NUT-WELD (M10X1.5-6H THD)
  • 274S44554S4455 CLIP--CLIP HOSE AS. TO 5-STEM VALVE
  • 288T41868T4186 BOLT (M10X1.5X40MM)
  • 296V89186V8918 BOLT (32mm LONG)
  • 306V83746V8374 SCREW-MACHINE (6-32X0.25IN)
  • 313L81873L8187 LOCKWASHER 7.24MM(.285IN.)O.D.
  • 325P74685P7468 CLIP (SLOT - SMALL)
  • 335P74695P7469 CLIP (TAB - SMALL)
  • 349G91529G9152 CLIP-SURE SEAL-TO BOSS ON BOTTOM LH OF
  • 358T70878T7087 GROMMET
  • 366D46366D4636 CLIP--CLIP HOSE AS. TO 5-STEM VALVE
  • 376T36316T3631 NUT-HEXAGON-(15/32-32 THD)
  • 386T36326T3632 LOCKWASHER 15.08MM(.594IN.)O.D.
  • 396T36336T3633 RING-LOCKING
  • 408D26768D2676 SWITCH AS (UPPER CAB LIGHTS)3412 Generator Set, 3516C Locomotive Engine, 3516C Generator Set, R2900G Load Haul Dump, 3512C Industrial Engine
  • 413T30483T3048 CLIP ASSEMBLY (ATTACH TO HARNESS BEHIND CAB)
  • 429X34959X3495 CLIP AS-TO RADIATOR BYPASS TUBE-FOR
  • 434K88644K8864 CLIP (USE WITH A/C)
  • 446G22636G2263 SPACER
  • 453E51693E5169 GUARD-SWITCH
  • 464D18364D1836 SWITCH (transmission control)
  • 479X14399X1439 LAMP GP (FIRST TYPE)7S Bulldozer, CS 423E Vibratory Compactor, 916 Wheel Loader, CP 563 Vibratory Compactor, CS 563 Vibratory Compactor
  • 485P83945P8394 SCREW-MACHINE
  • 498X58048X5804 STRAP AS-GROUND
  • 505B21835B2183 NUT (9/16)
  • 5110030551003055 CONTROL GROUP (E/G COOLANT TEMP.)950G Wheel Loader, 972G Wheel Loader, 966G Wheel Loader, 793C Truck, 854G Wheel Dozer
  • 5210214001021400 SENSOR GP-PRESSURE994 Wheel Loader, 5130 Mining Excavator, 5230 Mining Excavator, 5130B Mining Excavator, 797 Truck
  • 5310104611010461 LAMP GP-WORKING5130 Mining Excavator, 5230 Mining Excavator, 5130B Mining Excavator
  • 5411622671162267 SWITCH GP-POSITION5130 Mining Excavator, 5230 Mining Excavator, 5130B Mining Excavator
  • 5510906431090643 PLATE AS
  • 5611850511185051 PLATE
  • 5710921191092119 GUARD AS
  • 5816863431686343 HARNESS AS
  • 5911210901121090 HARNESS AS
  • 6011269431126943 BRACKET AS
  • 6111267971126797 PLATE
Suitable for assembly
  • 1670931 WIRING GP-ENCLOSURE
WhatsApp
wechat
Line
Email
Skype
Telegram
X
Telegram
X
Line
X
Line