Part NO. 1561019 CONTROL GP-MACHINE Fits for 5230 Mining Excavator

Part NO. 1561019 CONTROL GP-MACHINE Fits for 5230 Mining Excavator

Product Name: Part NO.1561019 CONTROL GP-MACHINE
CCR: N
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Product Name: Part NO.1561019 CONTROL GP-MACHINE
CCR: N
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Part NO.1561019 assembly
  • SEQPart NO.NameQTYNPRMODELModifier
  • 406587X63157X6315 STRAP AS-GROUNDY(GROUNDING)
  • 4226410108521010852 SCREW-PAN HEADY(8-32X0.375-IN)
  • 422656V67036V6703 KIT-RETAINING BOLTY(UNPROGRAMMED CONTROL)
  • 82265815610201561020 SOFTWARE GP-ELECTRONICY

Part NO.1561019 CONTROL GP-MACHINE suitable for 6I7648 WIRING GP-ELECTRONIC CONTROL
NPR: Y
  • SEQPart NO.NameMODEL
  • 18T42238T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM
  • 28T41338T4133 NUT-ELBOW TO MANIFOLD
  • 38T41218T4121 WASHER-HARD (21.0 MM OD)
  • 48T41368T4136 BOLT-ALTERNATOR STRAP TO FAN DRIVE
  • 58P85408P8540 GROMMET 27 mm(1.06 in.) Wide
  • 67K11817K1181 STRAP USE AS REQUIRED
  • 78T41798T4179 BOLT (20mm LONG)
  • 89X82569X8256 WASHER (2.0MM THK)
  • 98T41378T4137 BOLT (M10 X 1.5 X 20MM)
  • 106Y65846Y6584 STRAP AS-GROUND
  • 113S20933S2093 STRAP-CABLE-TO TIE HARNESSES TOGETHER
  • 128T69128T6912 BOLT (50 mm LONG)
  • 138T36128T3612 NUT (M10) (WELD)
  • 148T64668T6466 BOLT (M10X1.50X60MM)
  • 158T41228T4122 WASHER-HARD-32MM OD X17MM ID X 3.5MM
  • 168T41718T4171 BOLT (M6X1.0X12MM)
  • 175C28905C2890 NUT (M6X1.00 THD)
  • 188T41388T4138 BOLT (M6X1.0X20MM)
  • 199B72339B7233 LOCKWASHER (Shake Proof)
  • 204B20434B2043 NUT (Part of 9F3099 Switch)
  • 214B48634B4863 WASHER (FOR USE CLAMP)
  • 2203240000324000 SCREW
  • 234F22944F2294 NUT (Part of 9F3099 Switch)
  • 249M84069M8406 CLIP-TO 8X7433 HARNESS AS ON FORE-AFT
  • 256N85896N8589 CIRCUIT BREAKER ASSEMBLY(15A)
  • 269F81259F8125 LOCKWASHER (external tooth)
  • 278M27708M2770 CLIP .5 in. (1.27 cm) I.D. hole
  • 284M74704M7470 GROMMET
  • 294L64544L6454 BOLT (BRACKET TO RADIATOR GUARD)
  • 301H32441H3244 LOCKWASHER (BRACKET TO CAB)
  • 318T46478T4647 SCREW-MACHINE
  • 326V83766V8376 SCREW-MACHINE (8-32X.25IN)
  • 338T03288T0328 WASHER-HARD (1MM THK)
  • 348T34908T3490 NUT-WELD (M10X1.5-6H THD)
  • 354S44554S4455 CLIP--CLIP HOSE AS. TO 5-STEM VALVE
  • 368T41868T4186 BOLT (M10X1.5X40MM)
  • 376V83746V8374 SCREW-MACHINE (6-32X0.25IN)
  • 383L81873L8187 LOCKWASHER 7.24MM(.285IN.)O.D.
  • 399R26139R2613 BOSS-WELD
  • 405P78485P7848 NUT
  • 416V81866V8186 NUT-FULL (LARGE)
  • 429N08699N0869 WASHER 25.5MM(1.0IN)OD
  • 437T10997T1099 LINK
  • 445P34545P3454 TERMINAL-CRIMP
  • 453K87823K8782 FUSE (10A) (LOCATION X)
  • 468T96558T9655 MOUNT-ISOLATION
  • 476I14186I1418 SPACERS
  • 486V96326V9632 NUT-WELD (M6X1 THD)
  • 4912581761258176 CAM-LATCH
  • 509X20329X2032 NUT (M4) (WELD)
  • 516D46366D4636 CLIP--CLIP HOSE AS. TO 5-STEM VALVE
  • 524V41644V4164 BUSHING-TERMINAL
  • 535P72115P7211 SEAL 1.30 m (56.68 in.)
  • 546T36316T3631 NUT-HEXAGON-(15/32-32 THD)
  • 556T36326T3632 LOCKWASHER 15.08MM(.594IN.)O.D.
  • 566T36336T3633 RING-LOCKING
  • 573E52393E5239 RELAY ASSEM.
  • 588T96588T9658 SPACER
  • 593T30453T3045 CLIP AS (FOR SS3-4 TYPE CONNECTOR)
  • 608D26768D2676 SWITCH AS (UPPER CAB LIGHTS)3412 Generator Set, 3516C Locomotive Engine, 3516C Generator Set, R2900G Load Haul Dump, 3512C Industrial Engine
  • 616V23696V2369 WIRE-(4 GAUGE)-(ORDER BY THE METER)
  • 629G43439G4343 TERMINAL-RING 4 GA. (1/4 SCREW)
  • 636V79786V7978 SCREW-MACHINE
  • 643T30483T3048 CLIP ASSEMBLY (ATTACH TO HARNESS BEHIND CAB)
  • 656V83786V8378 NUT (10-32 THD)
  • 668Y37958Y3795 BOSS
  • 679G76419G7641 SWITCH GP (ENGINE STARTER)365B Excavator, 330D LN Excavator, 143H Motor Grader, 245 Excavator, 235 Excavator
  • 686G22636G2263 SPACER
  • 6909889680988968 WASHER
  • 703T03763T0376 SWITCH ASSEM. (MAIN RELAY)375 A Excavator
  • 719X84869X8486 SCREW-MACHINE
  • 723T30473T3047 CLIP AS-TO HARNESS CONNECTORS IF 9G9154
  • 738X47118X4711 BOSS AS
  • 743C69693C6969 NUT-M3 HEX FULL
  • 758D95378D9537 CAP ASSEM.
  • 763V47843V4784 FUSE HOLDER
  • 773E72943E7294 CIRCUIT BREAKER AS
  • 783T87283T8728 CIRCUIT BREAKER ASSEM. (20A)
  • 798T53468T5346 TUBE-HEAT SHRINK
  • 805P83945P8394 SCREW-MACHINE
  • 813T30463T3046 CLIP AS-TO HARNESSES AT REAR OF CAB
  • 826V83656V8365 SCREW-MACHINE
  • 839G94879G9487 CIRCUIT BREAKER AS. (10 AMP)
  • 844F56444F5644 NUT-FULL (1/4-20 THD)
  • 852F09512F0951 LOCKWASHER (6.65MM ID)
  • 868X58048X5804 STRAP AS-GROUND
  • 876D93316D9331 WASHER
  • 884B12554B1255 SCREW-MACHINE (1/4-20X.750 IN)
  • 896V95056V9505 SCREW EARLY MACHINES
  • 908T41308T4130 STUD (M6) (WELD)
  • 919X26069X2606 SCREW-ROUND HEAD
  • 9212480981248098 LATCH ASSEM.
  • 936V67026V6702 CONTROL GP-VIDS/VIMS MAIN793C Truck, 784B Tractor, 785B Truck, 793B Truck, 789B Truck
  • 9410722821072282 LAMP GP-SIGNAL793C Truck, 994 Wheel Loader, 784B Tractor, 785B Truck, 793B Truck
  • 956V66496V6649 MODULE GP-VIDS/VIMS INTERFACE793C Truck, 784B Tractor, 785B Truck, 793B Truck, 789B Truck
  • 968X38698X3869 HINGE
  • 9710876961087696 BAR
  • 9810050751005075 CONTROL GP-MACHINE5130 Mining Excavator, 5230 Mining Excavator
  • 997I53127I5312 STRIP
  • 10010359711035971 CABLE AS
  • 10110359731035973 CABLE AS
  • 10210892501089250 PLATE AS
  • 10310359691035969 WIRE AS
  • 10410876771087677 WIRE AS
  • 10510876781087678 WIRE AS
  • 10610456121045612 BAR
  • 10710876821087682 BRACKET
  • 10812578051257805 DOOR AS
  • 10912578061257806 COVER AS
  • 11011063841106384 CONTROL GP-MACHINE5230 Mining Excavator
  • 11112342481234248 CONTROL GP-MACHINE5230 Mining Excavator
  • 11215610191561019 CONTROL GP-MACHINE5230 Mining Excavator
  • 11311266761126676 HARNESS AS
  • 11411354251135425 BRACKET
  • 11513192711319271 BOX AS
  • 11612578551257855 BOX AS
  • 11710906591090659 CONTROL GP-ELECTRONIC
  • 11812485871248587 CONTROL GP-ELECTRONIC
  • 11912582501258250 HARNESS AS
  • 12012582511258251 HARNESS AS
  • 12113566811356681 HARNESS AS
The names KAWASAKI, BOSCH, REXROTH, NABTESCO, KAYABA, NACHI, EATON, TOSHIBA, CATERPILLAR, Cat, John Deere, KOMATSU,HITACHI,KOBELCO,KATO,SUMITOMO,HYUNDAI,DOOSAN,DAEWOO,SAMSUNG, YANMAR, KUBOTA, JCB, CASE, NEW HOLLAND, ISUZU, MITSUBISHI, HINO, DEUTZ, PERKINS, CUMMINS, ZEXEL, DENSO, DELPHI or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only. Our website is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.
X
Telegram
X
Line
X
Line