Part NO. 1330240 HARNESS AS for 5130 Mining Excavator

Product Name: Part NO.1330240 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5130 Mining Excavator

Get a Quote -

DESCRIPTION

Product Name: Part NO.1330240 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5130 Mining Excavator

Part NO.1330240 HARNESS AS suitable for 1063612 WIRING GP-CHASSIS
NPR: Y

SEQPart NO.NameMODEL
13K03603K0360 SEAL PILOT MANIFOLD ON
27N97377N9737 HOUSING TO AIR START SOLENOID VALVE
37N77797N7779 SOCKET-GOVERNOR SOLENOID WIRE TO HOUSING
47N77807N7780 PIN--GOVERNOR SOLENOID WIRE TO HOUSING
58T42238T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM
68T41338T4133 NUT-ELBOW TO MANIFOLD
78T41218T4121 WASHER-HARD (21.0 MM OD)
88T41368T4136 BOLT-ALTERNATOR STRAP TO FAN DRIVE
97K11817K1181 STRAP USE AS REQUIRED
109G91509G9150 CLIP-TO ENGINE COOLANT SWITCH MOUNTING
118T41798T4179 BOLT (20mm LONG)
128T41378T4137 BOLT (M10 X 1.5 X 20MM)
133S20933S2093 STRAP-CABLE-TO TIE HARNESSES TOGETHER
143E33653E3365 WEDGE-RECEPTACLE LOCK
158T87298T8729 PIN-CONNECTOR
1610288021028802 KIT-RECEPTACLE (2 PIN)
172M97802M9780 SEAL-O-RING 19.18 MM (0.755 IN) DIAMETER
188T41968T4196 BOLT (M10 X 1.50 X 35 MM)
198T66858T6685 BOLT (110 mm LONG)
206V39226V3922 SEAL-O-RING (ID=18.72mm)
215P90855P9085 CLIP (7.94 MM ID)
2203382480338248 CLIP (small)
234B20434B2043 NUT (Part of 9F3099 Switch)
244B48634B4863 WASHER (FOR USE CLAMP)
254D77944D7794 CLIP-- COMPRESSOR CLUTCH WIRE TO COMPRESSOR BODY
269M84069M8406 CLIP-TO 8X7433 HARNESS AS ON FORE-AFT
274D22974D2297 SEAL 15.6 mm (.614 in.)i.d.
288M27708M2770 CLIP .5 in. (1.27 cm) I.D. hole
294P75814P7581 CLIP (FOR USE WITH 7.9MM WIDE TIE WRAP)
309X18139X1813 SLEEVE (ORDER BY CM)(USE AS REQUIRED)
313L81873L8187 LOCKWASHER 7.24MM(.285IN.)O.D.
326D42446D4244 CLIP (large)
336V18896V1889 CLIP (28.58MM ID)
344P74284P7428 LADDER CLIP
354P74294P7429 CLIP (26.5MM ID)
366V69346V6934 CLIP
373T30483T3048 CLIP ASSEMBLY (ATTACH TO HARNESS BEHIND CAB)
389X34959X3495 CLIP AS-TO RADIATOR BYPASS TUBE-FOR
398T87328T8732 RECEPTACLE-CONNECTOR
403T18153T1815 ALARM (back-up)PR 1000 Cold Planer, PR 1000C Cold Planer, BG 230 Asphalt Paver, AP 800C Asphalt Paver, RR 250 Road Reclaimer
415P83945P8394 SCREW-MACHINE
426V83686V8368 NUT (6-32 THD)
437N44477N4447 SWITCH ASSEM. (hyd. oil filter)
4410275321027532 SENSOR GP-TEMPERATURE
4511699331169933 SWITCH AS-PRESSURE
463E93423E9342 SWITCH AS-LIQUID LEVEL
4710833961083396 HARNESS AS
4811957041195704 HARNESS AS
4910851121085112 PLATE
5013302401330240 HARNESS AS

Suitable for assembly

1063612 WIRING GP-CHASSIS

Previous:225 Excavator Part 5C0165 HARNESS AS

Next:Part Number 1118463 CONTROL GP-GOVERNOR Fits for 312-A Excavator