Part Number 1256744 HARNESS AS Suitable for 5230 Mining Excavator

Product Name: Part NO.1256744 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Get a Quote -

DESCRIPTION

Product Name: Part NO.1256744 HARNESS AS
CCR: Y
FILTER: N
MAINT: N
For Model: 5230 Mining Excavator

Part NO.1256744 HARNESS AS suitable for 6I7635 WIRING GP-SWING FRAME
NPR: Y

SEQPart NO.NameMODEL
13K03603K0360 SEAL PILOT MANIFOLD ON
28T42238T4223 WASHER-HARD-25.5MM OD X 13.5MM ID X 3MM
38T41338T4133 NUT-ELBOW TO MANIFOLD
48T41218T4121 WASHER-HARD (21.0 MM OD)
58T41368T4136 BOLT-ALTERNATOR STRAP TO FAN DRIVE
67K11817K1181 STRAP USE AS REQUIRED
79G91509G9150 CLIP-TO ENGINE COOLANT SWITCH MOUNTING
88T41798T4179 BOLT (20mm LONG)
98T41378T4137 BOLT (M10 X 1.5 X 20MM)
103S20933S2093 STRAP-CABLE-TO TIE HARNESSES TOGETHER
113E33653E3365 WEDGE-RECEPTACLE LOCK
128T87298T8729 PIN-CONNECTOR
132M97802M9780 SEAL-O-RING 19.18 MM (0.755 IN) DIAMETER
148T41968T4196 BOLT (M10 X 1.50 X 35 MM)
158T41858T4185 BOLT (M10 X 1.50 X 50 MM)
168T41958T4195 BOLT (M10) (30MM LONG)
175P90855P9085 CLIP (7.94 MM ID)
1803382480338248 CLIP (small)
196D42466D4246 CLIP 19.05 mm(.75 in.) wide
201S09941S0994 CONDUIT CLIP (USE AS REQUIRED)
214B20434B2043 NUT (Part of 9F3099 Switch)
224B48634B4863 WASHER (FOR USE CLAMP)
234D77944D7794 CLIP-- COMPRESSOR CLUTCH WIRE TO COMPRESSOR BODY
249M84069M8406 CLIP-TO 8X7433 HARNESS AS ON FORE-AFT
259X18139X1813 SLEEVE (ORDER BY CM)(USE AS REQUIRED)
268M27738M2773 CLIP .69 in. (17.5mm) dia. hose
276V18896V1889 CLIP (28.58MM ID)
287X25437X2543 BOLT (M10X1.5X120MM)
294P74284P7428 LADDER CLIP
304P74294P7429 CLIP (26.5MM ID)
313T30483T3048 CLIP ASSEMBLY (ATTACH TO HARNESS BEHIND CAB)
327D72337D7233 CLIP (LARGE)
339X34959X3495 CLIP AS-TO RADIATOR BYPASS TUBE-FOR
344K88644K8864 CLIP (USE WITH A/C)
3510588271058827 SUPPRESSOR GP-ELECTRONIC950F II Wheel Loader, D5HTSK II Track Skidder, 994 Wheel Loader, 773B Truck, 776C Tractor
366G22636G2263 SPACER
378T87328T8732 RECEPTACLE-CONNECTOR
383T18153T1815 ALARM (back-up)PR 1000 Cold Planer, PR 1000C Cold Planer, BG 230 Asphalt Paver, AP 800C Asphalt Paver, RR 250 Road Reclaimer
395P83945P8394 SCREW-MACHINE
408X58048X5804 STRAP AS-GROUND
4110275321027532 SENSOR GP-TEMPERATURE
4211699331169933 SWITCH AS-PRESSURE
4310851121085112 PLATE
4411210631121063 HARNESS AS
4512567441256744 HARNESS AS

Suitable for assembly

6I7635 WIRING GP-SWING FRAME

Previous:Part 1263020 MOTOR AS-GOVERNOR Suitable for 317-A Excavator

Next:320B LL Excavator Part 1211153 WIRING GP-FINE SWING